Now --volume takes an absolute volume, meaning it doesn't depend on
--softvol-max. 0 is still silence, and 100 now always means unchanged
volume. The OSD and the "volume" property are changed accordingly.
Also raise the minimum value of --softvol-max. A value below 100 makes
no sense and breaks the OSD.
The code checking for the type of seeking contained some if else
statements. To improve readability, I decided to refactor those
statements to a switch statement.
Reduce the default tolerance for timestamp jumps from 60 to 15 seconds.
For .ts files, where ts_resets_possible coming from AVFMT_TS_DISCONT is
set, apply a more sophisticated heuristic. It's clear that such a file
wouldn't have a framerate below, say, 23hz. If the demuxer reports a
lower fps, we allow longer PTS jumps.
This should replace long pauses on discontinuities with .ts files with
at most a short stutter.
Of course, all kinds of things could go wrong anyway if the source is
VFR, or FFmpeg's frame rate detection fails in some other way. I haven't
found such a file yet, though.
Commit 10915000 attempted to fix wasting CPU when resyncing and no new
data was actually coming from the demuxer. The fix assumed that at this
point it would have reached the sync point, but since the code attempts
weird incremental decoding, this wasn't actually true. So it broke
seeking in addition to removing the CPU waste.
Try something else. This time, we essentially only wakeup again if
data was read (i.e. audio_decode() returned successfully).
The OSD symbol for seeking to an absolute percentage was always OSD_FFW,
even when it should be OSD_REW. It uses the correct OSD symbols now, by
checking the current position ratio.
Note: The symbol is still incorrectly given when the absolute percentage
is very close to the current position ratio. Fortunately, that's a rare
use case.
Thsi code path happens during seeking. If video is still being decoded
to get to the first video frame, audio has nothing to do, as it is
synchronized against the first video frame. We only want to wake up if
there's an actual state change.
Fixes#1958.
Only absolute percentage seeking was permitted first. It is now also
possible to seek by relative percentage.
MPSEEK_FACTOR is used as seek_type.
Fixes#1950.
Signed-off-by: wm4 <wm4@nowhere>
There is not much of a reason to have these wrappers around. Use POSIX
standard functions directly, and use a separate utility function to take
care of the timespec calculations. (Course POSIX for using this weird
format for time values.)
OpenSSL and GnuTLS are still causing this problem (although FFmpeg could
be blamed as well - but not really). In particular, it was happening to
libmpv users and in cases the pseudo-gui profile is used. This was
because all signal handling is in the terminal code, so if terminal is
disabled, it won't be set. This was obviously a questionable shortcut.
Avoid further problems by always blocking the signal. This is done even
for libmpv, despite our policy of not messing with global state.
Explicitly document this in the libmpv docs. It turns out that a version
bump to 1.17 was forgotten for the addition of MPV_FORMAT_BYTE_ARRAY, so
document that change as part of 1.16.
mp_find_config_file() will print the filename lookup and its result in
verbose mode. This is wanted, but gets inconvenient when it is done for
every playlist entry (for resuming).
Lookup the watch_later subdir only once and cache the result instead.
This drops the logic for loading the resume file from other locations,
which should generally be unnecessary, though might lead to confusion if
the user has mixed old and new config paths (which the user shouldn't).
Also add a mp_find_user_config_file() function for a more
straightforward and reliable way to get actual local configpaths,
instead of possibly global and unwritable locations.
Also, for symmetry, check the resume option in mp_load_playback_resume()
just like mp_check_playlist_resume() does.
This creates the window before the first file is loaded. This was
requested a bunch of times, but on the other hand a change to make this
behavior the default was reverted some time ago, because other users
hated it.
The client API (libmpv) and encoding (--o) have slightly different
defaults from the command line player. Instead of doing a bunch of calls
to set the options explicitly, use profiles. This is simpler and has the
advantage that they can be listed on command line (instead of possibly
forcing the user to find and read the code to know all the details).
Since commit 7381db60, strings like "~desktop/" were expanded as
platform-specific paths by mpv. Apparently this similarity to standard
Unix shell expansion caused confusion, so change it to "~~desktop/". The
shell doesn't expand this, so it should be better.
And split the Cocoa and Unix cases. Simplify the Cocoa case slightly by
calling mpv_main directly, instead of passing a function pointer. Also
add a comment explaining why Cocoa needs a special case at all.
This unbreaks compiling command line player and libmpv at the same
time. The problem was that doing so silently disabled the OSX
application thing - but the command line player can not use the
vo_opengl Cocoa backend without it.
The OSX application code is basically dead in libmpv, but it's not
that much code anyway.
If you want a mpv binary that does not create an OSX application
singleton (and creates a menu etc.), you must disable cocoa
completely, as cocoa can't be used anyway in this case.
This should take care of the endless complaints about the default
location for screenshots (and will of course create new ones).
If the screenshot-template is set to an absolute path, the directory
won't be used. So this should be reasonably compatible.
In the most simple case, this prevents the track ID from changing. One
disadvantage is that if the file fails loading, the track is gone for
good and would have to be re-added explicitly by the user.
Should help with debugging, and might be slightly more userfriendly.
Note that this is called manually in multiple entry-points, instead of
the functions doing the actual work (like mp_remove_track()). This is
done so that exiting the player or calling the sub_reload command won't
print redundant in-between states.
During seeking, and there is momemtarily no new data available yet, the
player will display the seek target as current time. Clamp this time to
the known time range as implied by the start time and the duration of
the file.
This improves behavior especially when seeking in audio files, for which
this for some reason triggers rather often. There were some users
complaining about this.
This makes behavior worse for files with timestamp resets, or
incorrectly reported duration. (The latter is relatively common,
e.g. libavformat shortcomings, or incomplete files.)
This will change the format option to "bestaudio/best" instead of
passing the "-x" argument to yt-dl.
Prevents the video still being downloaded in the new mpv versions where
the yt-dl format is set to "best" by default.
This could make the player crash on exit if the "sub_reload" command was
used successfully. the reason was that the mpctx->sources array could
have dangling pointers to the unloaded demuxers.
Also fix a memory leak by actually always freeing the per-stream
subtitle decoders (which are a hack to make ordered chapters behave
better).
Fixes PNG cover art not showing up immediately (for example when running
with --pause).
libavformat exports embedded cover art as a single packet. For example,
a PNG attachment simply contains the PNG image, which can be sent to the
decoder. Normally you would expect that the PNG decoder would return 1
frame for 1 packet, without any delays. But this stopped working, and it
incurs a 1 frame delay.
This is perfectly legal (even if unexpected), so let our code feed the
decoder packets until we get something back. (In theory feeding the
packet instead of a real flush packet is still somewhat questionable.)
last_av_difference can be MP_NOPTS_VALUE under certain circumstances
(like no video timestamp yet). This triggered the desync message,
because fabs(MP_NOPTS_VALUE) is quite a large value. We don't want to
show a message in this situation.
The options don't change, but they're now declared and used privately by
demux_mkv.c. This also brings with it a minor refactor of the subpreroll
seek handling - merge the code from playloop.c into demux_mkv.c. The
change in demux.c is pretty much equivalent as well.
