Instead, force everyone to use the metadata struct and set a "title"
field. This is only a problem for the timeline producers, which set up
chapters manually. (They do this because a timeline is a separate
struct.)
This fixes the behavior of the chapter-metadata property, which never
returned a "title" property for e.g. ordered chapters.
enable_key_bindings()/disable_key_bindings() now prints a log message on
each call, thus we should avoid makign redundant calls.
This could probably be solved more elegantly, but since this is all
legacy/private API, don't bother.
If this mode is enabled, the player tries to strictly synchronize video
to display refresh. It will adjust playback speed to match the display,
so if you play 23.976 fps video on a 24 Hz screen, playback speed is
increased by approximately 1/1000. Audio wll be resampled to keep up
with playback.
This is different from the default sync mode, which will sync video to
audio, with the consequence that video might skip or repeat a frame once
in a while to make video keep up with audio.
This is still unpolished. There are some major problems as well; in
particular, mkv VFR files won't work well. The reason is that Matroska
is terrible and rounds timestamps to milliseconds. This makes it rather
hard to guess the framerate of a section of video that is playing. We
could probably fix this by just accepting jittery timestamps (instead
of explicitly disabling the sync code in this case), but I'm not ready
to accept such a solution yet.
Another issue is that we are extremely reliant on OS video and audio
APIs working in an expected manner, which of course is not too often
the case. Consequently, the new sync mode is a bit fragile.
For video sync, we want separate playback speed controls for user-
requested speed and the "correction" speed for video timing. Further, we
use this separation to make sure only a resampler is inserted if
playback speed is only changed for video sync correction.
As of this commit, this is basically inactive code. It's just
preparation for the video sync code (the following commit).
Additionally to taking the average, this tries to use the demuxer FPS to
eliminate jitter, and applies some other heuristics to check if the
result is sane.
This code will also be used for the display sync code (it will actually
make use of the require_exact parameter).
(The value of doing this over keeping the simpler demux_mkv hack is
somewhat questionable. But at least it allows us to deal with other
container formats that use jittery timestamps, such as mp4 remuxed
from mkv.)
Removes some more internal API calls from the Lua scripting backend.
Which is good, because ideally the scripting backend would use libmpv
functions only.
One awkwardness is that mouse sections are still not supported by the
public commands (and probably will never), so flags like allow-hide-
cursor make no sense to an outside user.
Also, the way flags are passed to the Lua function changes. But that's
ok, because they're only undocumented internal functions, and not
supposed to be used by script users. osc.lua only does due to historical
reasons.
This was requested. It was more or less present internally already and
used for Lua scripting. Lua will switch to the "public" functions in
the following commits.
Now it can always be read. Normally returns the value of the video-
aspect option. Writing it sets the option. If the aspect is not forced,
it will attempt to return whatever is the current video aspect.
Instead of opening a stream and then a demuxer, do both at once with
demux_open_url().
This requires some awkward additions to demuxer_params, because there
are some weird features associated with opening the main file. E.g. the
relatively useless --stream-capture features requires enabling capturing
on the stream before the demuxer is opened, but on the other hand
shouldn't be done on secondary files like external subtitles.
Also relatively bad: since demux_open_url() returns just a demuxer
pointer or NULL, additional error reporting is done via demuxer_params.
Still, at least conceptually, it's ok, and simpler than before.
Nobody wanted to restore this, so it gets the boot.
If anyone still wants to volunteer to restore menu support, this would
be welcome. (I might even try it myself if I feel masochistic and like
wasting a lot of time for nothing.) But if it does get restored, it
should be done differently. There were many stupid things about how it
was done. For example, it somehow tried to pull mp_nav_events through
all the layers (including needing to "buffer" them in the demuxer),
which was needlessly complicated. It could be done simpler.
This code was already inactive, so this commit actually changes nothing.
Also keep in mind that normal DVD/BD playback still works.
Normally when there's a timestamp reset, we make audio resync to make
sure audio and video line up (again). But in video-only mode, just
setting audio to resyncing breaks EOF detection, because there's no code
which would get audio_status out of this bogus state.
Commit c5818046 fixed one case of audio EOF handling, and caused a new
one. This time, the ao_buffer doesn't actually contain everyting that
should be played - because if --end is used, only a part of it is
played. Of course this is stupid, and it will be changed later. For now,
this smaller change fixes the bug.
Fixes#2189.
time_frame is when the next video frame should be shown. It's normally
overwritten by the video timing code. This also says something about
"nosound mode" (--no-audio today), but at least these days we don't use
it at all if video is disabled.
Remove it; it likely has no function at all.
Remove the exception for decoding only 1 frame if VO framedrop is
disabled. This was originally done to be able to test potential
regressions when we enabled VO framedrop and decoding 2 frames by
default. It's not needed anymore.
In paused mode, we never entered the audio EOF state. This shows e.g. in
--keep-open mode, which will not set the eof-reached property correctly.
Regression since commit c06cd1b9. This commit was the wrong fix. We need
to respect the buffer state, and pausing has nothing to do with this.
Fixes#2167.
If filters are disabled or reconfigured, attempt to remove and probe the
deinterlace filter again. This fixes behavior if e.g. a software deint
filter was automatically inserted, and then hardware decoding is enabled
during playback. Without this commit, initializing hw decoding would
fail because of the software filter; with this commit, it'll replace it
with the hw deinterlacer instead.
Instead of calling it "future frames" and adding or subtracting 1 from
it, always call it "requested frames". This simplifies it a bit.
MPContext.next_frames had 2 added to it; this was mainly to ensure a
minimum size of 2. Drop it and assume VO_MAX_REQ_FRAMES is at least 2;
together with the other changes, this can be the exact size of the
array.
ass_set_fonts() is called by mp_ass_configure_fonts(), which was called
every time a subtitle renderer was initialized. I'm not sure why this
was done - I can't find a good reason, and most likely there's none.
However, it did cause problems with an experimental libass branch. It
crashed some time after switching to a second subtitle track. The branch
will hopefully be merged soon, and it seems unlikely that libass wants
to fix its problems with its ridiculous API (rather it should normalize
its API so that the issue doesn't happen in the first place), so just
apply this change. It makes our code simpler too.
mp_seek_chapter() had only 1 caller. Also the code was rather
roundabout; the entire function can be compressed to 5 lines of code.
(The new code is functionally the same - "mpctx->last_chapter_seek =
-2;" was effectively a dead assingment.)
This is a real pain: if a quit command is received, it's set to PT_QUIT.
And then other code could overwrite it, making it not quit. The annoying
bit is that stop_play is written and read in many places. Just not
overwriting it unconditionally seems to be the best course of action.
Each subtitle track gets its own decoder instance (sd_ass). But they use
a shared ASS_Renderer. This is done mainly because of fontconfig.
Initializing fontconfig is very slow when using it with memory fonts, so
there's a practical need to cache this memory font state, which is done
by not creating separate ASS_Renderers. This is very dirty and very
evil, but we probably can't get rid of it any time soon.
The shared ASS_Renderer was not properly synchronized. While the program
logic guarantees that only one sd_ass instance is visible at a time,
there are other interactions that require synchronization. In
particular, I suspect concurrent execution of mp_ass_configure_fonts()
and sd_ass.get_bitmaps cause issues in a newer libass development
branch.
So here's a shitty hack that hopefully fixes things, hopefully only
until libass becomes less dependent on fontconfig.
For the sake of removing the separate stream/demuxer loading code.
This could probably be reimplemented in some other way, but I have no
DVB hardware for testing. The most preferred way would be making DVB to
not quit, and just rerun the stream selection.
The final goal is making opening the demuxer and opening the stream the
same operation.
Stream dumping is a rather uninteresting feature, but has a small
number of vocal users, and it's easy to keep.
draw_image_timed is renamed to draw_frame. struct frame_timing is
renamed to vo_frame. flip_page_timed is merged into draw_frame (the
additional parameters are part of struct vo_frame). draw_frame also
deprecates VOCTRL_REDRAW_FRAME, and replaces it with a method that
works for both VOs which can cache the current frame, and VOs which
need to redraw it anyway.
This is preparation to making the interpolation and (work in progress)
display sync code saner.
Lots of other refactoring, and also some simplifications.
Now the VO can request a number of future frames with the last parameter
of vo_set_queue_params(). This will be helpful to fix the interpolation
code.
Note that the first frame (after playback start or seeking) will usually
not have any future frames (to make seeking fast). Near the end of the
file, the number of future frames will become lower as well.
